Planning applications in Gillingham (Medway)

T1 - Hornbeam - Reduce height by 2m from 14m leaving at 12m and Reduce radial spread by up to 2m from 7m leaving at 5m

T1 - Oak - Reduce height and radial spread by 2m (Current height 16m leaving at 14m and Current radius 10m leaving at 8m)

Construction of first floor extension to convert existing 3 bedroom bungalow into a 4 bedroom house

T1 - Beech - Fell

T1 - Oak - Prune to offer a 2.5m clearance from the neighbours property

Application for a Lawful Development Certificate (proposed) for the extension of the existing skatepark within Cozenton Park, to the south of the existing…

Change of use from dwellinghouse (Use Class C3) to children's care home (Use Class C2)

Variation of conditions 6 (Parking Management Plan) and 7 (Refuse Management Strategy) on planning permision MC/26/1271 - to change the wording of condition 6…

Details pursuant to condition 4 (Archaeological Watching Brief) on planning permission MC/25/1086 for construction of two detached buildings comprising of 4…

Construction of a single storey extension to form entrance lobby and installation of first floor windows and roof lights to all elevations together with…

Prior notification for change of use from doctors surgery to five residential flats at first floor level (Class C3)

(T1) Ash - Reduce tree by 2m in height and spread to give a final height of 6m and radius of 3.5m (T2) Ash - Reduce tree by 1m in height and spread to give a…

Variation of condition 2 (approved plans) to allow a minor material amendment to planning permission MC/26/1559 for enlargement of dormer window to front

T1 Beech - Over-extended main limb to north (from 5m) reduce this and additional upper branch by approximately 3m to fall into shape with main northern canopy…

T89.1 Remove & re-plant (due to continued decline and presence of fungal fruiting bodies) T31 as per attached report T67 as per attached report T75 as per…

Application for a non-material amendment to planning permission MC/20/0347 for the removal of footpath in the open space to avoid amenity concerns

G1 - Group of Maple and Holm Oak - to lift the lower canopy over the drive to 3.5 metres. Selectively reduce back the remaining overhanging canopy by approx. 2…

T1. Beech - Reduce crown by 2-3m, thin by 10-15%. Crown reducing to a finished tree height of 11m and canopy radius of 4m.

Construction of a single storey rear extension - demolition of existing rear projection

T001 - Hornbeam (Carpinus betulus) - remove south western stem, reduce height of remaining north eastern stem from 15m to 12m to balance crown. Remove deadwood…

T1 - Oak - removal of deadwood and crown reduce lateral from 13m to 10m, height from 22m to 16.5m

T1 - Oak Tree -cut epicormic growth below split stems on trunk and removed. Thinning crown 15% to avoid excessive shading. Raise crown no more than 6m from…

T1 - Oak - Reduce the branches by 3m which would leave the crown at 4m creating a tall pollard

Construction of a detached single storey dwelling house with parking and associated works

Details pursuant to condition 4 (Further Details) on planning permission MC/26/0643 - Listed building consent for the replacement of existing conservatory

Construction of a ground floor front extension to garage.

T20 London Plane. Repollard to uppermost pollard heads at approximately 6.5m above ground level. Pollard heads not to be damaged, but all branches above…

T1- sweet chestnut at approx 12m high with lat spread of 5m. Overall reduction by approx 25%, to 9m x 3.5m respectively.

Sycamore (G2) - Dismantle declining tree to maintain as 6m monolith Ash (G9) - Fell declining tree with Ash dieback Lime (2) - Raise low canopy to 3m. Tree…

T1 - Oak - Reduce the tree by 2 meters leaving at 18m. To lift the tree to crown break by removing sucker growth and deadwood.